Specifications

17
MV01-94000-00
Rev C
Micro-Adjusting Backrest Angle for Comfort and Performance
1. For adjustment of the backrest, rider must be out of the wheelchair.
2. Insert 6mm Allen Wrench (Key) into Backrest Angle Adjuster if you have a Single
Post Seatback Backrest Assembly. Insert 5mm Allen Wrench (Key) into Backrest
Angle Adjuster if you have a Double Post Seatback Backrest Assembly.
3. Turn counterclockwise for forward adjustment. Turn clockwise to recline.
4. WARNING: Ensure that at least 1/4” of the backrest adjustment bolt protrudes from
the backrest adjustment clamp. Failure to heed these warnings could cause damage
to your wheelchair, injury to yourself, a fall, a tip-over and/or loss of control, causing
severe injury to yourself or others.
Macro-Adjusting Backrest Angle
1. For adjustment of the backrest, rider must be out of the wheelchair. Insert 4mm