Owners Guide

7
1-7 The outer shell of the refrigerator and the door cover are 1/32nd inch carbon steel with olive drab
nish. The inner shell and door liner are plasc. The door has a magnec latch. There is a door security snap
fastener located at the upper le corner for use during transport.
1-8 Specicaons. Table 1-1 lists the complete specicaons and parameters for the refrigerator,
NSN 4110-01-629-6841.
Parameter Specicaon
Acceptable input voltages 115/230 VAC. Step-down transformer provided for use with 230 VAC source.
Acceptable input frequencies 50/60 Hz.
Power consumpon 380 was nominal; 2100 was maximum surge
Line current, maximum 18 amps inrush at 115 V; 9 amps inrush at 230 V.
Weight 106 lbs.
Volume, internal 6.1 cubic feet
Outer dimensions 34-3/4” H x 25-3/8” W x 24-1/16” D
Internal volume
Freezer
Refrigerator
0.7 cubic feet, minimum
4.5 cubic feet, minimum
Pull down mes at ambient temperature of:
120 degrees F
100 degrees F
77 degrees F
5.0 hours, max.
2.0 hours, max.
1-1/4 hours, max.
Nominal weight and volume in shipping container
Weight
Volume
Dimensions
135 lbs.
16.8 cubic feet
38-1/2” H x 28” W x 27” D
Type of refrigerant R-134a
Weight of full charge of refrigerant 4.4 oz. (0.27 lb. or 0.12 kg.)
Table 1-1
1-9 Required tools. Table 1-2 lists all of the tools required for normal use and maintenance of the refrigera-
tor.
Table 1-2
Descripon No. Req.
Hex Key Wrenches, 1/8” and 5/32” 1 of each
Phillips head screwdriver (8” long) 1
Flat blade screwdriver, (small approximately 1/8” wide blade) 1
Hand roller 1
36” x 36” cardboard sheet 1
36” x 36” table or bench 1
Channel lock adjustable pliers 1
Combinaon open end / box end wrenches 1
any standard mul-meter for checking voltages and connuity of circuits 1
Nut Driver, 5/16” and 3/8” 1 of each
For tools and associated equipment used in maintenance
procedures NOT described in this manual, refer to Depot-level
maintenance organizaon or contact the manufacturer:
Marvel Refrigeraon
1260 E. VanDeinse St.
Greenville MI 48838
800.223.3900