Owners Guide

Cleaning instrucons

Condenser

The condenser underneath the cabinet does not require fre-

quent cleaning; however, sasfactory cooling depends on ad-

equate venlaon over this heat exchanger. It is recommended

to annually clean the condenser by vacuuming and brushing.

To access the condenser, the unit must be pulled out from the

installaon, and the lower machine compartment access cover

removed.

Disconnect the power cord before cleaning the condenser.

Be sure that nothing obstructs the required air ow openings

in front of the cabinet. At least once or twice a year, brush or

vacuum lint and dirt from the front grille area (see page 4).

Cabinet

The painted cabinet can be washed with mild soap and water and

thoroughly rinsed with clear water. NEVER use abrasive scouring

cleaners.

Interior

Wash interior compartment with mild soap and water. DO NOT

use an abrasive cleaner, solvent, polish cleaner, or undiluted de-

tergent.

Glass Door (oponal)

Use a glass cleaner or mild soap and water, and so cloth to clean

the glass door model. DO NOT use any abrasive cleaners.

Door Gasket

The vinyl gasket may be cleaned with mild soap and water, a bak-

ing soda soluon, or a mild scouring powder.

CARE AND CLEANING