Owners Guide

ENERGY SAVING TIPS
Energy Saving Tips
The following suggesons will minimize the cost of operang
your refrigeraon appliance.
1. Do not install your appliance next to a hot appliance, (ovens,
glassware washers, etc.). heang air duct, or other heat
sources.
2. Install product out of direct sunlight.
3. Assure the toe grille vents at front of unit beneath door are
not obstructed and kept clean to allow venlaon for the
refrigeraon system to expel heat.
4. Plug your appliance into a dedicated power circuit. (Not
shared with other appliances).
5. When inially loading your new product, or whenever large
quanes of warm contents are placed within refrigerated
storage compartment, minimize door openings for the next
12 hours to allow contents to pull down to compartment
set-point temperature.
6. Maintaining a relavely full storage compartment will re-
quire less appliance run me than an empty compartment.
7. Assure door closing is not obstructed by contents stored in
your appliance.
8. Allow hot items to reach room temperature before placing
in product.
9. Minimize door openings and duraon of door openings.
10. Use the warmest temperature control set-point that pro-
vides the proper storage for your stored contents.
11. Set the control to the “o” posion if cleaning the unit
requires the door to be open for an extended period of
me.
12. Annually clean condenser heat exchange coil located
in machine compartment underneath unit, (see “Care
and Cleaning” page 12).
11