Owners Guide

5
GROUNDING METHOD AND ELECTRICAL REQUIREMENTS
Figure 4
Grounding Method
This product is factory equipped with a power supply
cord that has a three-pronged, grounded plug. It must be
plugged into a mating grounding type receptacle in accor-
dance with the National Electrical Code and applicable lo-
cal codes and ordinances (see Figure 4). If the circuit does
not have a grounding type receptacle, it is the responsibility
and obligation of the customer to provide the proper power
supply.
Electrical Requirements
Electrical Requirements: A 115 volt, 15 amp dedicated cir-
cuit is required. A 3 prong grounded receptacle is required.
The unit must be installed according to your local building
codes and ordinances.
Electrical Shock Hazard
• Do not use an extension cord with this appliance.
They can be hazardous and cause decient opera-
tion.
• This unit should not, under any circumstances, be
installed to an un-grounded electrical supply.
• Do not remove the grounding prong from the power
cord.
• Do not use an adapter.
• Do not splash or spray water from a hose on the
appliance. Doing so may cause an electrical shock,
which may result in severe injury or death.
!
WARNING