manual
14
USING YOUR ELECTRONIC CONTROL
Starting your clear ice machine:
Plug the ice machine into a 115 volt wall outlet,
(see page 5 for electrical information). Your
appliance is shipped from the factory in the "ICE" mode
and will begin start-up of ice production after the start-up
routine.
Upon applying power to the unit, or after a power
interruption, the Ice machine will perform a self-test,
followed by a harvest cycle to clear any in-process ice
production. This start-up routine, (“after power is applied
to the unit”), takes approximately 13 minutes to complete
before an ice production cycle starts.
,IWKHDSSOLDQFHGRHVQRWVWDUWFRQ¿UPWKHZDOORXWOHWKDV
power, and the control is in the "ICE" mode, (see Options
section below). Do not start the ice machine in "ECO"
mode. "ECO" mode should only be used after there is a full
bin of ice.
hours
ICE
1 4 6 8
OFF CLEAN
DOOR
ECO
days
212))LFRQXVHGIRUWXUQLQJWKH
appliance on and off.
0(18LFRQXVHGWRDFFHVVRSWLRQDO
functions in the user interface.
Display icons:
ICE
1
4
6
8
hours
days
&ORFNLFRQXVHGWRHQWHUWKH'HOD\VWDUW
vacation mode.
/2&.LFRQXVHGWRORFNRXWIXQFWLRQVLQ
the user interface.
Display area text:
ICE
OFF
DOOR
CLEAN
ECO
6LJQL¿HVWKHDSSOLDQFHLVRQDQGSURGXFLQJ
ice.
6LJQL¿HVWKHDSSOLDQFHLVRII
6LJQL¿HVDGRRUDMDUDODUPFRQGLWLRQ
Cleaning is recommended or the appliance
is in the clean mode.
6LJQL¿HVWKHDSSOLDQFHLVLQHFRQRPLFDOLFH
production mode.
Figure 22
User interface display
On/off Menu Display area Delay timer Lock
:KHQOLWWKLVVLJQL¿HVWKHGHOD\VWDUWYDFDWLRQPRGHLV
operational.
Hours or days will be lit
Hours or days timer is set for
Delay start/Vacation mode:
The control display is covered with a clear plastic protective
¿OP7KLV¿OPPD\EHUHPRYHGE\FDUHIXOO\OLIWLQJDWD
corner.
NOTE
Light
/,*+7LFRQXVHGWRWXUQWKHLQWHULRUOLJKW
on and off, glass door models only.










