Use and Care Guide

7
"D"
"E"
"H"
"G"
"F"
"J"
MODEL
ROUGH-IN OPENING DIMENSIONS CABINET DIMENSIONS
"A" "B" "C" "D" "E" "F" "G" "H" "J"
ML24BS(S)
ML24BT(S)
24"
(61 cm)
**34" to 35"
(86.4 to 88.9 cm)
24"
(61 cm)
23
7
⁄8"
(60.7 cm)
33
3
⁄4" to 34
3
⁄4"
(85.7 to 88.3 cm)
23
23
⁄32"
(60.2 cm)
25
21
⁄32"
(65.2 cm)
46
13
⁄32"
(117.9 cm)
25
11
⁄16"
(65.2 cm)
ML24BS(P)
ML24BT(P)
24"
(61 cm)
**34
1
⁄4" to 35
1
⁄4"
(87 to 89.5 cm)
*24"
(61 cm)
23
7
⁄8"
(60.7 cm)
34" to 35"
(86.4 to 88.9 cm)
22
7
⁄8"
(58.1 cm)
-
46
1
⁄2"
(118.1 cm)
23
1
⁄8"
(58.7 cm)
DOOR STYLE
(S) Solid Door
(P) Solid Overlay Door (no handle)
MODEL
PRODUCT DATA
ELECTRICAL
REQUIREMENTS#
PRODUCT
WEIGHT
ML24BS(S)
ML24BT(S)
115V/60Hz/15A
140 lbs
(63.6 kg)
ML24BS(P)
ML24BT(P)
115V/60Hz/15A
140 lbs
(63.6 kg)
Figure 12
21
1
⁄2"
(54.6 cm)
12
1
⁄4"
(31.1 cm)
11
15
⁄16"
(30.3 cm)
11"
(27.9 cm)
Figure 10
* To install (P) models with the door face ush with adja-
cent cabinetry doors, custom decorative panel thickness
cannot exceed
3
⁄4" (19 mm).
** Minimum rough-in opening required is to be larger than
the adjusted height of the cabinet.
# A grounded 15 amp dedicated circuit is required. Follow
all local building codes when installing electrical and appli-
ance.
PRODUCT DIMENSIONS ML24BS AND ML24BT
Figure 10a
Figure 11
If necessary to gain clearance inside the rough-in
opening a hole can be cut through the adjacent cabi-
net and the power cord routed through this hole to a
power outlet. Another way to increase the available
opening depth is to recess the power outlet into the
rear wall to gain the thickness of the power cord plug.
Not all recessed outlet boxes will work for this applica-
tion as they are too narrow, but a recessed outlet box
equivalent to Arlington #DVFR1W is recommended for
this application, (see Figure 11).
"A"
"B"
"C"
"D"
"E"