Specifications

DUAL ZONE WINE CELLAR FEATURES
4
Independent Storage Compartments
Both compartments can be set for either temperature
range, red or white, but for more efficient energy usage
and functionality of the unit, it is better to use the top com-
partment for reds (warmer) and the bottom compartment
for whites (cooler).
Insert Wine Bottles
The five (5) upper shelves each hold eight (8) bottles in a
vertical fashion. See Figures 4 and 5 for typical wine bottle
spacing. The bottom shelf holds four (4) bottles in a hori-
zontal fashion.
Roll-out Racks
The top five (5) roll-out wine racks may be pulled out ap-
proximately fourteen (14) inches to facilitate adding or
removing bottles and the bottom shelf may be pulled out
approximately eight (8) inches. Do NOT lean on or press
down heavily on the wine shelves. Doing so may damage
the shelves and the wine bottles stored on them. Pull the
wine racks out gently and carefully to minimize unsettling
your wine collection. AVOID pulling out more than one (1)
rack at any time to maintain stability.
Single Bottle Racks
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles (see Figure 6).
Vibration Neutralization System
The Vibration Neutralization System (VNS) is a unique
three-layer design that protects your wine from damaging
vibration without sacrificing cabinet capacity.
The compressor is isolated from the wine storage cav-1.
ity, virtually eliminating the transfer of vibration.
Vibration isolating mounts on the compressor offer a 2.
second layer of protection from vibration transfer.
A vibration dampening mat inserted onto each shelf 3.
absorbs any stray vibrations.
Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 3
Figure 4
Figure 5