SDS

8. Exposure Control/Personal Protection:
8.1 Control parameters
Exposure Limits 8 hr TWA: (OSHA PEL) (ACGIH TWA)
Petroleum Oil (Mist) 5 mg/m
3
5 mg/m
3
Petroleum Naphtha (Vapor) 100 mg/m
3
200 mg/m
3
Hydrocarbyl Amine not applicable not applicable
8.2 Exposure controls
Use adequate ventilation to keep exposure below recommended limits. Ensure that eye wash
station and safety shower are close to work station.
Hand Protection Equipment: Wear chemical resistant gloves to prevent skin contact.
Eye Protection Equipment: Wear safety glasses or splash goggles to prevent eye contact.
Skin and Body Protection: Wear suitable protective clothing.
Respiration/Ventilation Protection Requirements: Provide good ventilation.
Ingestion Protection Requirements: Do not eat, drink or smoke while handling. Wash hands
with soap and water after handling. Launder all clothing and foot wear before re-use.
9. Physical And Chemical Properties:
9.1 Information of basic chemical and physical properties
Physical Form: thin liquid
Color: light amber
Odor: mild
Odor Threshold: not available
pH: not applicable – oil based product
Melting Point/Freeze Point: not available
Initial Boiling Point: not available
Flash Point (Seta Closed Cup): 71⁰C (160⁰F)
Flammability Limits: Explosive Limits: Upper: not available Lower: not available
Evaporation Rate: not available
Flammability Solid/Gas: not applicable
Vapor Pressure: not available
Vapor Density: not available
Specific Gravity: 0.8-0.9 @15.6ºC(60.1ºF)
Solubility in Water: insoluble
Auto Ignition Temperature: not available
Partition coefficient (n/octonol/water): not available
Viscosity (Kinimatic @ 100⁰C): 4 mm
2
/sec @40ºC (104ºF)
9. 2 Other information
% NVM by Weight: 55.0%
% VOC Content (California): 45.0%
10. Stability and Reactivity:
10.1 Reactivity
Does not react under normal conditions
10.2 Chemical stability
Stable