Solid Door

FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS
STEP 3: SELECTING AND PREPARING THE OVERLAY PANEL
For a 3.5 inch Toe Kick
(Covers the Entire Door Extrusion)
Optional for a 4 inch Toe Kick
(To Match Existing Cabinetry
Toe Kick Height)
0.25 dia x 3/8 Deep Hinge Screw Clearance Hole.
Locate and drill using drill hinge hole after the door
has been aligned to the unit and when the wood is
positioned on the door.
0.25 dia x 3/8 Deep Hinge Screw Clearance Hole.
Locate and drill using drill hinge hole after the door
has been aligned to the unit and when the wood is
positioned on the door.
0.25 dia x 3/8 Deep Hinge Screw Clearance
Hole. Locate and drill using drill hinge hole
after the door has been aligned to the unit
and when the wood is positioned on the door.
0.25 dia x 3/8 Deep Hinge Screw Clearance
Hole. Locate and drill using drill hinge hole
after the door has been aligned to the unit
and when the wood is positioned on the door.
0.63 Min.
0.75 Max.
0.63 Min.
0.75 Max.
Mounting Surface
(Non-Face) Side
Mounting Surface
(Non-Face) Side
Mounting Surface
(Non-Face) Side
Mounting Surface
(Non-Face) Side
Mounting
Surface
(Non-Face) Side
Mounting
Surface
(Non-Face) Side
Pre-Drilled Pilot Holes
10 Places
See Step 1,
for Drill Size
Pre-Drilled Pilot Holes
10 Places
See Step 1,
for Drill Size
Top Surface
0.73
Top &
Bottom
0.73
14.75 14.75
8.94 8.94
5.81 5.81
30.31
29.81
0.81
Both Sides
0.81
Both Sides
5.73
5.73
15.16 15.16
24.59 24.59
2