MARVEL FULL OVERLAY PANEL FOR SOLID DOORS Full Overlay Panel for Solid Doors Installation Instructions Wine Cellars 3SWC 3SWCE 30WC 30WCM Beverage Centers 3SBAR 3SBARE 3BAR 3BARM Refrigerators 30AR Ice Machines 25iM 30iMT
FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS STEP 1: WOOD SCREWS REQUIRED STEP 2: ASSEMBLING DOOR HINGE BUSHING BRACKETS 1. A #8 pan head wood screw should be used to properly secure the overlay panel. A total of 10 screws will be needed for a 3 1/2 inch toe kick or 8 screws for a 4 inch toe kick. 2. Use only pan head screws. 3. DO NOT select a screw that is longer than the wood thickness at the screw locations. 4. Use recommended pilot holes for the frame material (see Table A below).
FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS STEP 3: SELECTING AND PREPARING THE OVERLAY PANEL Optional for a 4 inch Toe Kick (To Match Existing Cabinetry Toe Kick Height) For a 3.5 inch Toe Kick (Covers the Entire Door Extrusion) 0.63 Min. 0.75 Max. 0.25 dia x 3/8 Deep Hinge Screw Clearance Hole. Locate and drill using drill hinge hole after the door has been aligned to the unit and when the wood is positioned on the door. 14.75 0.63 Min. 0.75 Max. Mounting Surface (Non-Face) Side 8.94 0.
FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS STEP 4: DETERMINING DOOR SWING The door you received is for a right hand swing unit. If the unit is to be changed to a left hand swing door, pre-drilled striker plate holes are in place on the backside of the door on both ends. No additional drilling is necessary to mount the striker plate when you reverse the door swing.
FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS STEP 5: ATTACHING THE OVERLAY PANEL TO THE DOOR (WITHOUT THE LOCK AND KEY FEATURE) CAUTION Door can become disengaged if washers are not installed. 2 Nylon Hardware Components at Top Hinge 0.625 OD x 0.218 ID Washer Shoulder Bushing Door Hinge Bushing Bracket Overlay Panel Top Hinge Corner CAUTION Door can become disengaged if washers are not installed. Refrigerator Door 1.
www.lifeluxurymarvel.com Marvel Industries P.O. Box 997 Richmond, IN 47375-0997 800.428.6644 An AGA Company 41008118 Rev C 10.30.07 All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products.
