Specifications

DOOR ALIGNMENT
Figure 5
Hinge adapter bracket lo-
cated on the top and boom
of the door.
Remove top
hinge pin to re-
move the door.
Door must be
parallel to top
and sides of
refrigerator.
9/32”
(7.1mm)
NOTE
6
For the door to close properly, it is necessary to maintain a
minimum space of 9/32” (7mm) between the door and cabinet
ange (See Figure 5). This space can be adjusted by adjusng the
top and boom hinge adapter brackets.
Door Alignment Procedure
The door should be parallel to the sides and top of the refrig-
erator. If alignment is necessary the door may be adjusted by
loosening the 2 screws which secure the hinge adapter brackets
on the top and boom of the door and adjusng the door side
to side. Use a 5/32” allen wrench for this procedure. (See Figure
5 below). When nished aligning the door, ghten the screws
securely.