Refrigerated Wine Chiller Installation Operation & Maintenance Instructions Part of AGA Foodservice Group
Inspection Remove Packaging Your wine cabinet has been packed for shipment with all parts that could be damaged by movement securely fastened. Before using, be sure all packing materials and tape have been removed. Important Keep your carton packaging until your wine cabinet has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit.
Grounding Method: This product is factory equipped with a power supply cord that has a threepronged grounded plug. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances (see figure 1).
How to Clean and Maintain Your Wine Chiller Condenser: The condenser tubing inside the cabinet does not require frequent cleaning; however, satisfactory cooling depends on adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet. At least once or twice a year brush or vacuum lint and dirt from the condenser for efficient performance by unscrewing the grille on the bottom front of the cabinet.
Appliance Features Adjustable Temperature Control: The temperature control is fully adjustable from the low forties to the mid sixties. The range allows flexibility of temperature preferences and provides the ideal wine aging and storing temperatures. Single Bottle Racks: Because bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles.
Before Calling for Service If You Do Need Service Before calling for service, check the trouble shooting table on this page. This table lists possible problems that you can remedy without difficulty to avoid an unnecessary service call. In the event that you do need service, be sure to report the model number, serial number and proof of purchase to your service representative. Model number and serial number are found on the serial plate which is located on the lower front cabinet flange.
IT IS IMPORTANT THAT YOU SEND IN YOUR WARRANTY RECORD CARD IMMEDIATELY AFTER TAKING DELIVERY OF YOUR REFRIGERATION APPLIANCE. Every new refrigeration appliance that leaves the factory contains this Owner's Guide in a safe place for convenient reference.
WWW.MARVELINDUSTRIES.COM Phone: (765) 962-2521 Fax: (765) 962-2493 Marvel Industries Part of AGA Foodservice Group 233 Industrial Parkway P.O.
