Specifications

OPERATING INSTRUCTIONS

STARTING PROCEDURE

PRIMER

BULB

FUEL

RETURN LINE

CHOKE

LEVER

OPEN

STARTER GRIP

— 8 —

English

STEP #1)

Pump the "PRIMER BULB" under of the

carburetor until fuel can be seen flowing

through the "FUEL-RETURN LINE".

STEP #2)

Move the "CHOKE LEVER" fully up ward to

the closed position. If the engine is already

warm, only a partial or open (no choke) choke

setting may be required.

STEP #3)

Set the throttle lever at 1/2 speed.

Standard

HIGH SPEED

IDLE SPEED

STOP

CAUTION!

Press down the "AIR FILTER COVER" and Pull the

"STARTER GRIP" briskly to start the engine.

NOTE: Only short pulls are necessary. Never pull the

starter cord to its fullest extension. Never let go of the

starter grip until it is at the fully returned position.