Owner's Manual

STEP 17: ATTACH TRIM PIECES

17a Before applying the trim pieces, check the interior metal

edge of the install board opening. Sand away any

sheet rock mud buildup so the trim will sit flush with the

surface.

17b Using #2 Phillips screwdriver. apply the top and bottom

trim pieces first, using the supplied machine screws.

(These screws will be in the trim packaging.)

17c Apply the side trim pieces the same way as the top and

bottom pieces.

NOTE: If using the optional on-wall enclosure instead of the

in-wall installation method, please ignore any references to

sheet rock or sheet rock mud, as they only apply to the

in-wall method of installation. All other steps apply to both

methods of installation.