Owner's Manual

Pre-installation CheCklist

NOTE: This is the second part of the Installation process.

Do not proceed until all steps in the “In-wall Back Box

Manual” have been completed.

If using the Statement On-Wall Enclosure you may pro-

ceed from Step 17.

Required Tools:

-3/32 Hex Bit (Not Included)

-5/32 Hex Bit (Not Included)

-Power Drill

-#2 Philips Bit

-#2 Hand Screwdriver

-Medium Grit Sanding Sponge

PLEASE NOTE: INSTALLATION IS A 2 PERSON JOB.