Brochure

A MASTERPIECE OF DESIGN & ENGINEERING. Distilling nearly forty

years of innovative audio design and engineering into a startlingly fresh

loudspeaker ideal.

Renaissance ESL 15A represents a major evolution of our classic

electrostatic loudspeaker. All of the familiar elements are here, along

with some revolutionary refinements. At the heart of this exceptional

loudspeaker you’ll find a 15-inch Curvilinear Line Source (CLS™) XStat™

vacuum-bonded electrostatic transducer with advanced MicroPerf™

stator technology and ultra-rigid AirFrame™ Blade construction. The

powerfully dynamic low-frequency experience is rendered with unflinching

accuracy and authority courtesy of dual 12-inch low-distortion aluminum

cone woofers. Each woofer is independently powered by a 500-watt

Class-D amplifier, and controlled by a 24-Bit Vojtko™ DSP Engine featuring

Anthem Room Correction (ARC™) technology.

QUICK SPECS:

• 46” x 15” XStat™ CLS™ Transducer

• Dual 12-inch PoweredForce Forward™ Woofers

• Dual 500W / Channel (4 ohms) Amplifiers

• 22—21,000 Hz ±3dB Frequency Response

• 24-bit Vojtko™ DSP Engine

• Anthem Room Correction (ARC™) ready

PAGE 1
A MASTERPIECE OF DESIGN & ENGINEERING. Distilling nearly forty years of innovative audio design and engineering into a startlingly fresh loudspeaker ideal. Renaissance ESL 15A represents a major evolution of our classic electrostatic loudspeaker. All of the familiar elements are here, along with some revolutionary refinements.
PAGE 2
System Frequency Response 22–21,000 Hz ±3 dB Recommended Amplifier Power 50–700 Watts per channel at 4 ohms Dispersion Horizontal: 30 degrees Vertical: 46” (116.9 cm) line source Sensitivity 92 dB / 2.83 volts / meter Impedance Nominal: 4 ohms, 0.5 ohms @ 20 kHz Crossover Frequency 300 Hz High/Mid Frequency Driver XStat CLS Electrostatic transducer Panel dimensions: 46” x 15” (116.9 cm x 38.1 cm) Radiating area: 690 in2 (4,454 cm2) Woofers Two 12” (30.