Manual

9
speCiFiCations*
Frequency Response ........
Dispersion ...............
Sensitivity................
Impedance ...............
Crossover Frequency........
High Frequency Driver ......
Low Frequency Drivers ......
Cabinet .................
Components ..............
Recommended Amp Power ...
Binding Post Inputs .........
Weight..................
Dimensions (HxWxD) .......
MARTINLOGAN MOTION 6i
120–23,000 Hz ± 3 dB
80° x 80°
89 dB @ 2.83 volts/ meter
6 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4,000 Hz
0.94” x 1” (2.4cm x 2.5cm)
Folded Motion Transducer with
2.8” x 1.25” (7.1cm x 3.2cm)
diaphragm.
Two 3.5” (8.9cm) poly cone
with stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Sealed
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
20–130 watts
Push style with banana jacks
5.7 lbs. (2.58 kg)
5.2” x 17.5” x 4”
(13.2cm x 44.4cm x 10.1cm)
MARTINLOGAN MOTION 8i
70–23,000 Hz ± 3 dB
80° x 80°
89 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
3,000 Hz
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer with
5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
Two 4” (10.2cm) paper cone
with stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Sealed
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
20–180 watts
Push style with banana jacks
8.5 lbs. (3.85 kg)
5.6” x 22” x 5.2”
(14.2cm x 56cm x 13.2cm)
*Specifications are subject to change without notice.