Manual

3 Locate mounting location using a level and the

installation template.

Note: HORIZONTAL installation requires the

use of TWO wall brackets.

Note: VERTICAL installation requires the use of

ONE wall bracket.

4 Mark the pilot hole locations.

5 Drill the pilot holes using a 1/8-inch drill bit. If

a pilot hole DOES NOT hit a stud, widen that

pilot hole using a 1/4-inch drill bit and install

a wall anchor at that location (fig. 7).

6 Using the 1-inch Phillips screws, mount the wall

bracket(s) as shown (fig. 7).

7 Hang the speaker, guiding the wall mount bolt

into the wall bracket keyhole(s).

Fig. 7