Manual

INSTALLING ON A WALL

Note: This speaker is mountable in either a hori-

zontal or vertical orientation. Horizontal mounting

requires the use of two shoulder bolts and two wall

brackets. Vertical mounting requires the use of only

one shoulder bolt and mounting bracket.

Note: These instructions assume the mounting

surface is standard wood frame and sheet rock

construction. If you wish to mount to another type

of surface, consult a bonded contractor.

Required tools/hardware (not supplied):

• (2 or 4) 1-inch Phillips sheet metal screws

• (2 or 4) Sheet rock anchors

• Ruler

• Level

• Electric drill and 1/4” and 1/8” drill bits

• Phillips screwdriver

Horizontal Install Required hardware (included):

• (1) Installation template

• (2) Wall brackets

• (2) Shoulder bolt

• (2) Wall pads

Vertical Install Required hardware (included):

• (1) Installation template

• (1) Wall brackets

• (1) Shoulder bolt

• (2) Wall pads

1 Screw shoulder bolt(s) into the back of the

speaker.

Note: HORIZONTAL installation requires the

use of TWO shoulder bolts (fig. 5A).

Note: VERTICAL installation requires the use of

ONE shoulder bolt (fig. 5B).

2 Affix the wall pads to the back of the speaker

at the lower contact points (fig. 6).

Fig. 5A

Fig. 6

Fig. 5B