Brochure

Motion 15i Motion 35XTi Motion 30i Motion 50XTi Motion 20i Motion 40i Motion 60XTi
Application Bookshelf Bookshelf Center Channel Center Channel Floorstanding Floorstanding Floorstanding
Frequency Response 60–25,000 Hz
±3 dB 50–25,000 Hz ±3 dB 65–25,000 Hz ±3 dB 50–25,000 Hz ±3 dB 46–25,000 Hz ±3 dB 40–25,000 Hz ±3 dB 35–25,000 Hz ±3 dB
Dispersion 80° x 80° 80° x 30° 80° x 80° 80° x 30° 80° x 80° 80° x 80° 80° x 30°
Sensitivity 92 dB @ 2.83 volts/ meter 92 dB @ 2.83 volts/ meter 91 dB @ 2.83 volts/ meter 94 dB @ 2.83 volts/ meter 90 dB @ 2.83 volts/ meter 92 dB @ 2.83 volts/ meter 94 dB @2.83 volts/ meter
Impedance 5 Ohms. Compatible with 4, 6,
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
Crossover Frequency 2,700 Hz 2,200 Hz 400 & 2,600 Hz 900 & 2,200 Hz 500 & 2,600 Hz 500 & 2,600 Hz 400 & 2,200 Hz
High Frequency Driver 1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer
with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
1.2” x 2.4” (3.2cm x 6.1cm)
Folded Motion Transducer
with 4.5” x 2.75” (11.4cm x
7cm) diaphragm.
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer
with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
1.2” x 2.4” (3.2cm x 6.1cm)
Folded Motion Transducer
with 4.5” x 2.75” (11.4cm x
7cm) diaphragm.
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer
with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer
with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
1.25” x 2.4” (3.2cm x 6.1cm)
Folded Motion Transducer
with 4.5” x 2.75” (11.4cm x
7cm) diaphragm.
Mid Frequency Driver — — — — — 5.5” (14cm) aluminum cone
with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
6.5” (16.5cm) aluminum cone
with cast polymer basket.
Sealed chamber format. Rigid
structured dust cap to reduce
cone break-up modes.
Low Frequency Drivers 5.25” (13.3cm) aluminum cone
with cast aluminum basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
6.5” (16.5cm) aluminum cone
with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Two 5.5” (14cm) aluminum
cone with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Two 6.5” (16.5cm) aluminum
cone with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Two 5.5” (14cm) aluminum
cone with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Two 6.5” (16.5cm) aluminum
cone with cast polymer basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Two 8” (20.3cm) aluminum
cone with cast aluminum basket.
Non-resonant asymmetrical
chamber format. Rigid struc-
tured dust cap to reduce cone
break-up modes.
Cabinet Ported Ported Ported Ported Ported Ported Ported
Components Custom air core coil and low
DCR steel laminate inductors.
Polypropylene film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Overall system thermal/
current protection.
Custom air core coil and low
DCR steel laminate inductors.
Polypropylene film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Custom air core coil and low
DCR steel laminate inductors.
Polypropylene film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Custom air core coil and low
DCR steel laminate inductors.
Polypropylene film capacitors
in series and low DF electro-
lytic capacitors in parallel.
Tweeter thermal/current
protection.
Recommended Amp Power 20–200 watts 20–250 watts 20–200 watts 20–300 watts 20–200 watts 20–300 watts 20–400 watts
Binding Post Inputs Custom 5-way tool-less
binding posts
Custom 5-way bi-wire tool-less
binding posts
Custom 5-way tool-less
binding posts
Custom 5-way bi-wire tool-less
binding posts
Custom 5-way bi-wire tool-less
binding posts
Custom 5-way bi-wire tool-less
binding posts
Custom 5-way bi-wire tool-less
binding posts
Weight 12 lbs. (5.4 kg) 17 lbs. (7.7 kg) 18 lbs. (8.2 kg) 29 lbs. (13.2 kg) 33 lbs. (15 kg) 45 lbs. (20.4 kg) 66 lbs. (30 kg)
Dimensions (HxWxD) 11.42” x 6.81” x 9.38”
(290 x 173 x 238.25 mm)
13.5” x 7.56” x 11.68”
(343 x 192 x 296.75 mm)
6.89” x 16.54” x 10.16”
(174.95 x 420 x 258 mm)
7.56” x 22.83” x 12.52”
(192 x 580 x 318 mm)
36.56” x 6.81” x 11.78”
(928.74 x 173 x 299.21 mm)
42.49” x 7.56” x 12.81”
(1079.12 x 192 x 325.25 mm)
47.95” x 11.42” x 14.38”
(1217.93 x 290 x 320 mm)
Specifications are subject to change without notice. | ©2019 MartinLogan Ltd. | Lawrence, Kansas, USA | www.martinlogan.com
The New Look of
Proven Performance.
Motion
®
Series martinlogan.com
Motion 20i
•
Motion 40i
•
Motion 60XTi
Motion 30i
•
Motion 50XTi
Motion 15i
•
Motion 35XTi
A MODERN TAKE ON A CLASSIC DESIGN.
Since its introduction, the Motion Series has garnered acclaim for its
performance and value. Reviewers loved its “incredibly lifelike tonality
and imaging,”
1
“excellent bass,”
2
and “sharply defined soundstage.”
3
“Easily one of the best speakers I’ve tested,”
1
one reviewer said, and
“you’re really getting a whole lot of speaker for your hard-earned
money,”
4
said another.
So when it came time to introduce a new generation of the Motion
Series, we decided not to mess with a good thing. Today’s modern,
multi-application speakers utilize the same classic performance tech-
nology as previous generations of the Motion Series, updated with
a stylish new enclosure design. The result is the same, but different;
familiar, but unexpected.
For music or home cinema, you’ll be moved by the performance of Mo-
tion speakers. Consider the fast transient response and distortion-free
output of the Folded Motion tweeters, a technology that mimics on a
small scale the performance of MartinLogan’s big electrostatic transduc-
ers. Also, consider the broad, realistic mid-range dynamics, smoothly
blended with deep, musical bass, thanks to the exacting tolerances of
custom, hand-built crossovers. All of these beloved ideals and more are
presented in an acoustically enhanced enclosure that proclaims: this is
today’s performance loudspeaker.
1. Brent Butterworth, HomeTheaterReview.com
2. Jared Rachwalski, Secrets of Home Theater & High Fidelity
3. David Martson, The Absolute Sound
4. Michael Trei, Sound & Vision