Brochure

Specifications are subject to change without notice.
Motion 2i, 4i, 6i, and 8i Folded Motion
®
Front, Center, and Surround Speakers
System Frequency Response
115–23,000 Hz ±3 dB
Dispersion
80° x 80°
Recommended Amplifier Power
20–100 Watts
Maximum Input Power
50 Watts
Sensitivity
86 dB @2.83 volts/meter
Impedance
6 Ohms. Compatible with 4, 6, or 8 Ohm
rated amplifiers.
Crossover Frequency
3,800 Hz
High Frequency Driver
0.94” x 1” (2.4cm x 2.5cm) Folded Motion
Transducer with 2.8” x 1.25” (7.1cm x
3.2cm) diaphragm.
Low Frequency Driver
3.5” (8.9cm) poly cone with stamped steel
basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce
cone break-up modes.
Components
Custom air core coil and low DCR steel
laminate inductors. Polyester film capacitors
in series and low DF electrolytic capacitors
in parallel. Overall system thermal/current
protection.
Cabinet
Sealed
Binding Post Inputs
Push style with banana jacks
Finish
Gloss Black
Accessories (included)
Wall mount bracket
Weight
3.4 lbs. each (1.54 kg)
Size (H x W x D)
10” x 4.7” x 4.6” (25.5 x 11.8 x 11.7 cm)
System Frequency Response
70–23,000 Hz ±3 dB
Dispersion
80° x 80
Recommended Amplifier Power
20–150 Watts
Maximum Input Power
75 Watts
Sensitivity
90 dB @2.83 volts/meter
Impedance
4 Ohms. Compatible with 4, 6, or 8 Ohm
rated amplifiers.
Crossover Frequency
2,900 Hz
High Frequency Driver
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
Low Frequency Driver
4” (10.2cm) paper cone with stamped steel
basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce
cone break-up modes.
Components
Custom air core coil and low DCR steel
laminate inductors. Polyester film capacitors
in series and low DF electrolytic capacitors
in parallel. Overall system thermal/current
protection.
Controls
Folded Bass Reflex Port
Binding Post Inputs
Push style with banana jacks
Finish
Gloss Black
Accessories (included)
Wall mount bracket
Weight
6 lbs. each (2.72 kg)
Size (H x W x D)
12.6” x 5.6” x 5.7” (32 x 14.3 x 14.5 cm)
System Frequency Response
120–23,000 Hz ±3 dB
Dispersion
80° x 80°
Recommended Amplifier Power
20–130 Watts
Maximum Input Power
65 Watts
Sensitivity
89 dB @2.83 volts/meter
Impedance
6 Ohms. Compatible with 4, 6, or 8 Ohm
rated amplifiers.
Crossover Frequency
4,000 Hz
High Frequency Driver
0.94” x 1” (2.4cm x 2.5cm) Folded Motion
Transducer with 2.8” x 1.25” (7.1cm x
3.2cm) diaphragm.
Low Frequency Driver
Two 3.5” (8.9cm) poly cone with stamped
steel basket. Non-resonant asymmetrical
chamber format. Rigid structured dust cap to
reduce cone break-up modes.
Components
Custom air core coil and low DCR steel
laminate inductors. Polyester film capacitors
in series and low DF electrolytic capacitors
in parallel. Overall system thermal/current
protection.
Cabinet
Sealed
Binding Post Inputs
Push style with banana jacks
Finish
Gloss Black
Accessories (included)
Two wall mount brackets
Weight
5.7 lbs. each (2.58 kg)
Size (H x W x D)
5.2 ” x 17.5” x 4” (13.2 x 44.4 x 10.1 cm)
System Frequency Response
70–23,000 Hz ±3 dB
Dispersion
80° x 80
Recommended Amplifier Power
20–180 Watts
Maximum Input Power
90 Watts
Sensitivity
89 dB @2.83 volts/meter
Impedance
4 Ohms. Compatible with 4, 6, or 8 Ohm
rated amplifiers.
Crossover Frequency
3,000 Hz
High Frequency Driver
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
Low Frequency Driver
Two 4” (10.2cm) paper cone with stamped
steel basket. Non-resonant asymmetrical
chamber format. Rigid structured dust cap to
reduce cone break-up modes.
Components
Custom air core coil and low DCR steel
laminate inductors. Polyester film capacitors
in series and low DF electrolytic capacitors
in parallel. Overall system thermal/current
protection.
Controls
Sealed
Binding Post Inputs
Push style with banana jacks
Finish
Gloss Black
Accessories (included)
Two wall mount brackets
Weight
8.5 lbs. each (3.85 kg)
Size (H x W x D)
5.6” x 22” x 5.2” (14.2 x 56 x 13.2 cm)