User Manual

Equalizer
The equalizer is exactly the same as the EQ from our AX73 plugin. It has three bands: a
low shelf, a bell filter for the mid range frequencies, and a high shelf. The three bands have
the same range so you could, for example, decide to shape the Mid in 5 kHz range or focus
it around the low frequencies.
Turn the EQ on with the On switch.
The Low dial sets the frequency of the low shelf and the Level dial sets its gain.
The Mid dial controls the frequency of the bell filter, the BW knob sets its Q and Level
controls its gain.
High sets the frequency of the high shelf and Level controls its gain.
Default Presets
AX Chorus comes with 16 default presets. These include AX73 and AX60 presets, which
are modeled on the two incarnations of the chorus in Martinic's AX73 plugin.
In the VST version of the plugin, the top bar allows you to select between the Default
Presets that will be shown in your DAW. You can navigate between these 16 spaces using
the left and right arrow keys on either side of the name.
If you have a DAW that uses the AU plugin format, the above selection method will be
unavailable but the default presets can be selected through your DAW’s interface and will
be read-only.
AX Chorus 13 / 14 Version 1.1.0