User manual

20
Synchronizing the trig rate to the music
In music trig mode, which is the default mode when the
MC-Showtime controller is activated, the built-in
microphone is used to synchronize the trig rate with the
music.
The 0XVLF button acts as a switch to turn music trig
mode on and off.
When this mode is activated, the associated indicator in
the LED display will blink at the trig rate.
To deactivate music trig mode, press the 0XVLF button,
or the $XWR button. Note that if no trig mode is active
then the fixtures will not change to the next scene in
the sequence.
Setting your own trig rate
To set your own trig rate, tap the $XWR button at that
rate.
Note that if you press $ XWR only once and hold it for a
second, then the default trigger rate for the pre-
programmed sequence will be used.
In auto trig mode the trig rate is not synchronized with
the music.
Auto
Trig
Music
Trig