User manual

Operation 19
Operation
Status LEDs
Operation can be monitored using the status LEDs on the front of the
Martin Splitters:
Martin DMX 5.3 Splitter
Martin RDM 5.5 Splitter
The power LED lights if AC mains power is applied and the
Splitter’s power supply unit is working.
The signal LED on the front panel lights green if a valid data
signal is present at the in socket.
The err (error) LED lights red if a signal present at the in socket
is faulty.
The LED under the termination button lights if the Splitter’s
internal DMX termination is activated.
The power LED lights if AC mains power is applied and the
Splitter’s power supply unit is working.
The signal LED on the front panel lights green if a valid signal
is present at the in socket and red if a faulty signal is present at
the in socket.
The rdm LED lights if an RDM signal is present.
The LED under the termination button lights if the Splitter’s
internal DMX termination is activated.
The LED under the dmx only button lights if the DMX-only filter
is active (i.e. all non-DMX signals are removed from outputs 1 -
5).
The signal LED next to outputs 1 - 5 lights if a valid DMX or
RDM signal is present at that output socket.