User Manual

This compact beam moving head for smaller venues blasts an

intense and narrow beam for spectacular mid-air looks and

effects. It houses a fixed gobo wheel and color wheel with a

multitude of effects possible from a dimmer and strobe, 6-facet

prism and focus.

· Powerful beam moving head

· Sharp, narrow long-throw beam

· Powerful mid-air effects

· Fixed gobo wheel

· Color wheel

· Mechanical dimming and strobe

· 6-facet prism

· Motorized focus

· 3 & 5 pin XLR

Physical Length: 319 mm (12.6 in.)

Width: 255 mm (10.0 in.)

Height: 481 mm (18.9 in.)

Weight: 14 kg (30.9 lbs.)

Lamp Approved lamp: Philips MSD Platinum 2R

Color temperature: 9000 K

CRI (Color rendering index): 75

Average lifetime: 2000 hours

Dynamic Effects Color wheel: 14 colors plus open, continuous and stepped scrolling, rotation with variable direction and speed

Static gobo wheel: 17 gobos plus open, continuous and stepped scrolling, rotation with variable direction and speed

Shutter: Strobe effect, pulse effects, instant open and blackout

Prism: 6-facet, indexing and rotation with variable direction and speed

Focus: Motorized

Dimmer: 0 - 100% continuous dimming

Pan: 540°

Tilt: 270°

Control and Programming Control system: DMX

DMX channels: 13

Setting and addressing: Control panel with LCD display

DMX compliance: USITT DMX512/1990

16-bit control: Dimming, pan and tilt

Pan and tilt speed: Adjustable via onboard control panel and DMX

Position correction system: Available for pan and tilt

Optics Beam angle: 3°

Construction Color: Black

Housing: High-impact flame-retardant thermoplastic

Protection rating: IP20

RUSH MH 4 Beam

Specifications

Olof Palmes Allé 18 8200 Århus N Denmark Tel. +45 87 40 00 00 Fax +45 87 40 00 10

PAGE 1
Specifications RUSH MH 4 Beam TM 1 This compact beam moving head for smaller venues blasts an intense and narrow beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, 6-facet prism and focus.
PAGE 2
Specifications Installation Connections Electrical Typical Power and Current Thermal RUSH MH 4 Beam TM 2 Minimum distance to illuminated surfaces: 6.5 m (21.3 ft.) Mounting points: Two quarter-turn brackets for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any AC power input: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode 110 V, 60 Hz: 2.
PAGE 3
Specifications Standard RUSH MH 4 Beam TM 3 Efficiency: 111% Efficacy: 27.6 lumens per watt Cut-off angle: 5° Total output: 5700 lm Published on: 2 May 2014. © 2013-2014 Martin Professional ApS. Specifications subject to change without notice Olof Palmes Allé 18 8200 Århus N Denmark Tel.