User Manual

RUSH MH 3 Beam User Manual 43
Troubleshooting
This section describes a few common problems that may occur during
operation and provides some suggestions for easy troubleshooting:
Symptom Potential cause Remedies
No light from fixture,
or fans not working.
Power supply issue
such as blown fuse,
faulty connector or
damaged cable.
Ensure that the mains
supply is connected and
supplying power to the
fixture.
Ensure that the fixture’s
power-on LED is lit.
Check all power
connections and cables.
Replace the fixture fuse.
Lamp cuts out
intermittently
Incorrect mains voltage
or internal temperature
too high.
Check mains voltage.
Check ambient
temperature, inspect
product to see if cleaning
is required.
Fan may need replacing.
Contact your RUSH by
Martin™ authorized
distributor or service
center for assistance.