User Manual
RUSH MH 3 Beam User Manual 41
Offset menu
The offset menu is used to adjust the home position of the various effects.
To access the Offset menu, press the MENU button to enter the menu
structure and then press and hold the ENTER button for three seconds.
Menu Sub-menu Setting Explanation
Offset
Menu
Pan -128~127 Pan offset
Tilt -128~127 Tilt offset
Shutter 0~255 Shutter offset
Color -128~127 Color offset
Gobo -128~127 Gobo offset
Prism 0~255 Prism offset
R-Prism -128~127 Rotating prism offset
Zoom 0~255 Zoom offset
Focus 0~255 Focus offset
Frost 0~255 Frost offset
Error messages
Error: Appears when:
Lamp Startup Fail No lamp or lamp wiring damaged.
Temperature Sense Error Temperature sensor on the PCB is damaged.
Lamp Too Hot Power Off
Temperature above maximum safe level has
been detected. Ensure that the fixture is
adequately ventilated.
Fans or temperature sensor may be damaged.
Contact authorized Martin™ service agent.
Lamp Too Hot Low Power
Temperature close to maximum safe level has
been detected. The fixture runs at a low power
level.