User Manual
24 RUSH MH 3 Beam User Manual
3. Select and activate the functions you wish to control.
4. Press MENU to exit.
Fixture information
Fixture operating hours counter
To display the total number of hours the fixture has been used:
1. Select FIXTURE INFORMATION and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FIXTURE USE TIME and press
ENTER to confirm. The number of hours is shown in the display.
3. Press MENU to exit.
Lamp operating hours counter
The resettable lamp operating time counter lets you monitor lamp use and see
when lamp replacement is due. The counter is available in the FIXTURE
INFORMATION→LAMP ON TIME menu. Do not exceed the specified lamp
lifetime, or the lamp may explode. Reset the counter when you replace the
lamp.
Firmware version
To display the software version installed in the fixture:
1. Select FIXTURE INFORMATION and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FIRMWARE VERSION and
press ENTER to confirm. The firmware version is shown in the display.
3. Press MENU to exit.
Reset functions or effects
The various effects—pan, tilt color, gobos, iris, focus, prism—or all effects, can
be manually reset to their home positions:
1. Select RESET FUNCTIONS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select the function or effect that is to be
reset. Press ENTER.
3. Use the DOWN and UP buttons to select YES and
4. Press ENTER to confirm (or press MENU to exit without making a
change).