User Manual
RUSH MH 3 Beam User Manual 23
Automatically turn off display backlight
By default the display is lit when the power is applied to the fixture. It can be
set to automatically dim if the buttons and menus have not been used for a
period:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT AUTO OFF and
press ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (auto off) or NO (constant
backlight).
4. Press ENTER to confirm (or press MENU to exit without making a
change).
Adjust backlight intensity
To adjust the brightness of the control panel display:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT INTENSITY and
press ENTER to confirm.
3. Use the DOWN and UP buttons to select a level from 1 to 10.
4. Press ENTER to confirm (or press MENU to exit without making a
change).
Fixture test
You can run an automatic test of all functions, or manually test individual
functions from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select AUTO TEST and press ENTER
to confirm. The automatic test will run.
3. Press MENU to exit the test.
Manual test
Fixture functions can be tested or controlled without a DMX signal:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select MANUAL TEST and press
ENTER to confirm.