User Manual
RUSH MH 3 Beam User Manual 21
2. Use the DOWN and UP buttons to select STATE/POWER ON and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select ON or OFF.
4. Press ENTER to confirm (or press MENU to exit without making a
change).
Off via DMX
To enable the lamp to be turned off via DMX:
1. Select LAMP SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select OFF VIA DMX and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select NO or YES.
4. Press ENTER to confirm (or press MENU to exit without making a
change).
On if DMX on
To set whether the fixture powers the lamp on automatically when it receives a
DMX signal:
1. Select LAMP SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select ON IF DMX ON and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select NO (lamp power is not applied
automatically) or YES (lamp power is applied automatically).
4. Press ENTER to confirm (or press MENU to exit without making a
change).
Off if DMX off
To set whether the fixture powers the lamp off automatically if a DMX signal
stops:
1. Select LAMP SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select OFF IF DMX OFF and press the
3. ENTER button to confirm.
4. Use the DOWN and UP buttons to select NO (lamp power is not shut
down automatically) or YES (lamp power is shut down automatically).
5. Press ENTER to confirm (or press MENU to exit without making a
change).