User Manual
20 RUSH MH 3 Beam User Manual
3. Use the DOWN and UP buttons to select the YES (inversion) or NO
(normal) mode.
4. Press ENTER to set (or press MENU to exit without making a change).
Pan/tilt feedback
When pan/tilt feedback is enabled and pan or tilt loses its correct position, the
fixture will detect this and reset pan and tilt so that the correct pan/tilt position
is restored.
To deactivate or activate this function, use the FIXTURE SETTINGS→P/T
FEEDBACK menu.
Blackout during change or movement
The fixture can be set so that when running a show, blackout is enabled
during gobo change, color change, and/or pan and tilt movement. This is
switched off by default. To adjust the blackout during show playback settings:
1. Select FIXTURE SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BL. O. P/T MOVING, BL.
O.COLOR CHANGE, or BL. O: GOBO CHANGE and press ENTER to
confirm.
3. Use the DOWN and UP buttons to select YES (blackout during movement
or change) or NO (normal).
4. Press ENTER to set (or press MENU to exit without making a change).
Lamp settings
Lamp on/off
To turn the lamp on or off via the control panel:
1. Select LAMP SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select ON/OFF and press ENTER to
confirm.
3. Use the DOWN and UP buttons to select ON or OFF.
4. Press ENTER to confirm (or press MENU to exit without making a
change).
State/power on
To set whether the fixture should power the lamp on automatically when the
fixture is powered on:
1. Select LAMP SETTINGS and press ENTER to confirm.