User guide

Control panel menus 31
PERSONALITY
(continued)
AUTO LAMP ON
OFF Automatic lamp striking disabled
ON
Lamp strikes automatically within 90
seconds of fixture being powered on
DMX
Lamp strikes automatically when the
fixture receives a DMX signal
DMX LAMP OFF
ON Lamp can be powered off via DMX
OFF
Lamp cannot be powered off via DMX (can
be overridden: see DMX protocol)
DMX RESET
ON Fixture can be reset via DMX
OFF
Fixture cannot be reset via DMX (can be
overridden: see DMX protocol)
EFFECT
SHORTCUT
ON
Effects take shortest route during
changes, crossing open positions if
necessary
OFF
Effects avoid open positions during effects
changes
AUTO BLACKOUT
OFF
Shutter/dimmer blackout does not call
up other effects.
ON
Iris and aerial wheel are deployed 5
seconds after shutter/dimmer blackout to
eliminate stray light.
DISPLAY
DISPLAY SLEEP
ON Display permanently on
2 MINUTES
Display goes into sleep mode 2 minutes
after last key press
5 MINUTES
Display goes into sleep mode 5 minutes
after last key press
10 MINUTES
Display goes into sleep mode 10 minutes
after last key press
DISPLAY
INTENSITY
10 ... 100 Set display intensity in % (default = 100)
DISPLAY
ROTATION
NORMAL /
ROTATE 180
Display orientation normal or rotated 180°
DISPLAY
CONTRAST
1 ...100 Adjust contrast of display (default = 41)
ERROR MODE
NORMAL
Enable error messages and warnings in
display
SILENT
Disable error messages and warnings in
display (the status LED will still light to
indicate fixture status if an error has been
detected or the fixture has a warning)
FACTORY
DEFAULT
LOAD FACTORY
SETTINGS
ARE YOU SURE?
YES/NO
Return all settings (except calibrations) to
factory defaults
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 2: Control menus