User manual

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 5
Quadray control
With the Quadray Module installed and the fixture running firmware version 1.2.0 or later and set to 16-bit
Extended mode, five extra DMX channels become available after the 23 channels in the standard MAC Viper
AirFX. These channels give the DMX control functions shown in the following table:
Channel Value Function
Fade
Status
Default
Value
29
0 - 40
41 - 80
81 - 100
101 - 130
131 - 180
181 - 183
184 - 255
Quadray overall control
Indexing
Rotation
No function
FX selection (see Table 2)
Positions
Continuous FX
Static FX
No function
Snap 101
30
0 - 255
0 - 2
3 - 126
127 - 129
130 - 253
254 - 255
0 - 255
0 - 2
3 - 126
127 - 129
130 - 253
254 - 255
0 - 255
Ray 1 Indexing
Indexing 0° - 360°
Ray 1 Rotation
No rotation
Rotating CW Fast  CW Slow
No rotation
Rotating CCW Slow  CCW Fast
No rotation
FX position fade time*
0 sec. - 10 sec.
Continuous FX rotation*
No rotation
Rotating CW Fast  CW Slow
No rotation (stops at current position)
Rotating CCW Slow  CCW Fast
No rotation
Static FX*
Min - Max
Fade 128
31
0 - 255
0 - 2
3 - 126
127 - 129
130 - 253
254 - 255
0 - 50
51 - 100
101 - 255
Ray 2 Indexing
Indexing 0° - 360°
Ray 2 Rotation
No rotation
Rotating CW Fast  CW Slow
No rotation
Rotating CCW Slow  CCW Fast
No rotation
Continuous FX start times*
Synchronized (all fixtures start FX
immediately)
Random (0 - 6 seconds random
offset between fixtures)
No function
Fade 128
Table 1: Quadray Module DMX channels