User guide

Control panel menus 29
* Menu available only when the fixture is connected to mains power. All other menus are available in mains- and battery-powered
operation.
TEST*
TEST ALL
Run test sequence of all functions. Press
Escape button to stop test
TEST PAN/TILT
Run test sequence of pan and tilt
functions. Press Escape button to stop test
TEST EFFECTS
Run test sequence of all effects. Press
Escape button to stop test
MANUAL
CONTROL*
RESET RESET Click jog wheel to reset fixture
LAMP ON/OFF Manually strike/douse lamp
STROBE 0 - 255 Set shutter/strobe effect (default = 30)
DIMMER 0 - 255 Set dimmer opening
DIMMER FINE 0 - 255 Set dimmer opening, fine (LSB)
CYAN 0 - 255 Add cyan
MAGENTA 0 - 255 Add magenta
YELLOW 0 - 255 Add yellow
CTC 0 - 255
Adjust color temperature control (add
warmth)
COLOR WHEEL 0 - 255 Select color filter
GOBO W 1 SEL 0 - 255 Select gobo, aerial effect wheel (wheel 1)
IRIS 0 - 255 Set iris aperture
ZOOM 0 - 255 Set zoom (default = 128)
ZOOM FINE 0 - 255 Set zoom, fine (LSB, default = 128)
FOCUS 0 - 255 Set focus
FOCUS FINE 0 - 255 Set focus, fine (LSB, default = 128)
PAN 0 - 255 Set pan angle (default = 128)
PAN FINE 0 - 255 Set pan angle, fine (LSB, default = 128)
TILT 0 - 255 Set tilt angle (default = 128)
TILT FINE 0 - 255 Set tilt angle, fine (LSB, default = 128)
CONTROL 0 - 255
Send value on DMX control channel
(default = 0)
SERVICE
ERROR LIST Empty or up to 20 errors Display any errors in memory
PT FEEDBACK
ON Enable pan/tilt position feedback systems
OFF Disable pan/tilt position feedback
FAN CLEAN ON/OFF Activate fan cleaning
CALIBRATION
PT AT END STOP ... TILT
Set individual effects to calibration
positions (approx. +/- 5% offset available)
LOAD DEFAULTS Load factory default calibration settings
SAVE DEFAULTS
Replace factory default calibration settings
with current calibration settings
USB
NO DEVICE
No USB device present or no firmware on
USB device
UPDATING FILES
Fixture updating internal memory from
USB device
AVAILABLE
FIRMWARE
VER. 1.0.0 ...
VER. X.X.X
Select firmware from versions stored in
internal memory: select version, then click
on jog wheel and confirm your choice to
update
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 4: Control menus