User manual

54 MAC III Performance user manual
MSB = Most significant byte
LSB = Least significant byte
34 40
0 - 39
40 - 44
45 - 49
50 - 54
55 - 59
60 - 64
65 - 69
70 - 74
75 - 79
80 - 84
85 - 89
90 - 94
95 - 99
100 - 104
105 - 109
110 - 114
115 - 124
125 - 129
130 - 134
135 - 139
140 - 144
145 - 149
150 - 154
155 - 159
160 - 179
180 - 184
185 - 189
190 - 194
195 - 199
200 - 204
205 - 209
210 - 214
215 - 219
220 - 224
225 - 229
230 - 234
235 - 239
240 - 244
245 - 249
250 - 255
0 - 13
14 - 15
16 - 17
18 - 19
20 - 21
22 - 23
24 - 25
26 - 27
28 - 29
30 - 31
32 - 33
34 - 35
36 - 37
38 - 39
40 - 41
42 - 43
44 - 47
48 - 49
50 - 51
52 - 53
54 - 55
56 - 57
58 - 59
60 - 61
62 - 69
70 - 71
72 - 73
74 - 75
76 - 77
78 - 79
80 - 81
82 - 83
84 - 85
86 - 87
88 - 89
90 - 91
92 - 93
94 - 95
96 - 97
98 - 100
Fixture adjustments/calibration
No function:
Enable pan/tilt limitation
(4)
No function
Disable pan/tilt limitation
(4)
No function
Set pan/tilt limit: head must stay inside defined area (create safe zone)
(4)
No function
Set pan/tilt limit: head must stay outside defined limits (create no-go zone)
(4)
No function
Store current pan position as lower pan limit
(4)
Store current pan position as upper pan limit
(4)
No function
Store current tilt position as lower tilt limit
(4)
Store current tilt position as upper tilt limit
(4)
No function
Reset pan and tilt limits
(3)
No function
Store dimmer calibration
(4)
Store cyan calibration
(4)
Store magenta calibration
(4)
Store yellow calibration
(4)
Store CTC calibration
(4)
Store CMYC calibration
(4)
Store gobo wheel slots 1 – 5 index calibration
(4)
No function
Store framing blade 1 calibration
(4)
Store framing blade 2 calibration
(4)
Store framing blade 3 calibration
(4)
Store framing blade 4 calibration
(4)
Store framing blade rotation calibration
(4)
Store gobo animation wheel index calibration
(4)
Store beam effect (prism) index calibration
(4)
Store iris calibration
(4)
Store focus calibration
(4)
Store zoom calibration
(4)
Store pan calibration
(4)
Store tilt calibration
(4)
No function
Reset all calibrations to factory default
(4)
No function
(3)
To activate:
Value must be held for 5 seconds
The CMY channels (3, 4 and 5 in 16-bit mode or 4, 5 and 6 in 16-bit
extended mode) must all be set to DMX value 232
The beam effect channel (24 in 16-bit mode or 28 in 16-bit extended
mode) must be set to DMX value 030.
(4)
To activate:
Value must be held for 5 seconds
Color/CMY macros channel 21 in 16-bit or 25 in 16-bit ext. must be set
to DMX value 005 - 010
Fixture control channel 33 in 16-bit or 39 in 16-bit ext. must be set to
DMX value 055 - 059.
Basic
16-bit
Mode
16-bit
Extended
Mode
DMX Value Percent Function
Table 3: MAC III Performance DMX Protocol