User manual

12 T-Rex user manual
T ROUBLESHOOTING 6
Problem Probable cause(s) Remedy
Fixture is completely dead.
No power to fixture. Check that power is
switched on and cables are
plugged in.
Primary fuse blown. Replace fuse.
Effect fails to reset correctly.
The effect requires
mechanical adjustment.
Contact Martin technician
for service.
No light.
Lamp missing or blown Disconnect fixture and
replace lamp.
Lamp cuts out intermittently
or burns out too quickly.
The operating voltage does
not match AC supply.
Contact Martin technician
for service.
Blocked air vent. Increase clearance around
fixture.
Dust buildup inside fixture. Contact Martin technician
for professional cleaning.
The fan may not be working.
This will result in the
thermostatic switch cutting
power to the lamp when the
fixture overheats. When the
fixtures cools the lamp will
come on again, causing the
fixture to heat, which will
again trip the thermostatic
switch, and so forth.
Contact Martin technician
for service.