User manual

10 T-Rex user manual
S ERVICE 5
With the exception of the mains fuse and the lamp, there are no user-serviceable
parts inside the T-Rex. Please refer all service to a Martin distributor, dealer, or
service center.
REPLACING THE MAIN FUSE
1 Unplug the mains cable from the input socket. Pry open the fuse holder and remove
the fuse.
2 Replace the fuse with one of the same type. The fuse rating is listed on serial
number label.
LAMP INSTALLATION
The T-Rex uses a 24V, 250W ELC halogen lamp. Two models are available: an
economical 500 hour lamp and a high-output 50 hour lamp. Installing any other
lamp may damage the fixture!
Allow the lamp to cool for at least 5 minutes before moving the fixture. To avoid
possible damage, remove the lamp when shipping the fixture.
Warning! Disconnect the fixture from AC power and allow the fixture to
cool for 5 minutes before installing a new lamp.