Specifications

92 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Controls for a single effect
Mac 500 Effect Control (single prism)
Some fixtures such as the MAC 500 implement a single effect only. In this case click the 'effect
button' to enable or disable the effect.
Rotating effects
MAC 2000 rotating effects control
Select rotating effects the same way as selecting fixed effects, using either the scroll control or the
effect palette.
Effect indexing
If the fixture is capable of indexing the effect use the index drag bar to set the actual index. On
fixtures with 16-bit effect index, hold down [Shift] and [Ctrl] keys to increase the changes in index
when clicking the buttons.
Effect rotation
Use the rotation control to set rotation direction using the CW and CCW buttons and speed using the
drag bar.
Rotation mode
Fixtures may often use the same control channel for rotation and indexing parameters. In this case it
is not possible to program individual rotation and indexing parameters in the same scene (it would
also not make much sense) - setting a rotation value effects the index value and changing the index
value effects the rotation values. The actual response from the fixture (rotation or index) is determined
by the rotation mode setting. Use the rotation mode buttons to select mode - note that it is usually
not possible to rotate the first open effect.
Other effect types