Specifications

90 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Fixture Trigged Gobos
Available on the Martin MX/CX series. The command sets the fixture to control the gobo wheel in
either auto or sound trigged mode, other control attributes (movement, colors) are not affected. The
actual mode is programmed via extended controls. If neither auto or music trig has been programmed,
the button displays a ? indicating an unselected trig mode.
Fixture trigged: auto, sound, unselected
See also gobo controls for user defined profiles, fade state buttons, fixture control elements,
customizing palettes
Gobo controls for user defined profiles
Click on the fixture tool bar to access the fixture gobo control.
The actual contents of the gobo control depends entirely on the user defined profile. The control
usually implements both drag bars for programming of DMX values directly and palette buttons for
direct gobo selection. The drag controls and palette buttons may affect one or more DMX control
channels. Drag controls are also often used to control functions such as gobo rotation or indexing, or
gobo wheel scroll. Some controls may also implement palette buttons for gobo related functions such
as gobo wheel scroll; functions like these may often be tweaked (e.g. the speed of the gobo wheel
scroll) by adjusting the value using the corresponding drag bar. Note that the control may implement
control of more than one gobo wheel.
See also gobo controls for built in profiles, fade state buttons, fixture control elements, customizing
palettes
Beam control
Beam controls for built in fixtures
Click on the fixture tool bar to open the beam control. The beam control is used to control beam-
related effects such as focus, zoom, iris, beam shapers and frost effects.
MAC500 beam Control