Specifications

86 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
RoboColor multi-head mode
RoboColor single-head mode
Controls for fixtures with multiple heads such as the Martin RoboColors may be switched between
single and multi head mode by setting Preferences -> Show all heads. When in single head mode
only one control/palette appears and all heads are automatically synchronized during programming.
CMY Color Mixing
CMY controls
Use the drag bars to set cyan, magenta, and yellow saturation.
CMY Mixing Palette
The mixing palette consists of 3 primary mix buttons, a color picker and a resulting mix color
indicator. Use the three buttons to right of the CMY drag to select the primary color mix to work in
cyan/magenta, yellow/magenta or cyan/yellow. Use the color picker to select a mix by dragging the
mouse around the picker while holding down the left mouse button. Example: to select an orange
color, select the Yellow/Magenta button and drag the mouse in the color picker to the right hand side
of the box until the required orange color is found.
Other Color Controls
Some profiles implements other color options as well as selecting colors - the options depend on the
actual capabilities of the fixture.
Color wheel scroll
Continuous rotation of the color wheel (scroll)
Use the control to set the scroll direction and speed. Not all fixtures may allow the wheel to scroll
both ways.
Special Color Functions
MAC 2000 special color functions
Fixtures may implement special commands such as random color selection or random CMY. When
used, LightJockey instructs the fixture to use build in effects. The special commands section may be
shown or hidden by checking or un-checking preferences -> Show Special the menu.