Specifications

76 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
It is also possible to move the pan and tilt by using the arrow buttons in the lower right side of the
control. Click and hold a button to move the fixture in one direction to a given direction.
Click home . to center the fixtures position.
The two buttons marked pan lock and tilt lock will lock the and tilt positions respectively. When
locked the position can be moved in one plane only.
Use the "Resolution" drag control to adjust the fineness of the position controls. The less the delta
value, the less the position will change when dragging in the position grid, or when clicking the arrow
buttons.
Click to clear an active movement macro.
Left-click options
Use the preferences menu to select one of two left-click modes: Mouse Mode (default) - select this
mode when using a mouse or trackball type device to control position. Touch mode - select this
mode when working with a touch type device.
Touch Mode
When in left-click touch mode, there are two distinct operation modes. Direct mode or 'joystick' mode.
The two modes are toggled between by clicking the Dir/Joy button located next to the 'arrow' buttons.
Position grid, joystick mode
Direct Mode
When in Direct Mode (Dir), the pan/tilt is set according to the position in the grid - resolution factor is
ignored.
Joystick Mode
In Joystick mode, the pan/tilt position is continuously modified as long as the device is 'activated' The
distance from center is combined with the resolution parameter to define a 'speed' of position change -
the direction of change is given by the direction of the 'line'. The direction/speed is illustrated by a