Specifications

60 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Any Tab - selects the fixture from any tab.
Same as Master - selects the fixture only if placed on the same tab as the Master fixture.
Current tab - selects the fixture if it is placed on the current tab only.
Selection Order
Fixture Number - uses the fixtures number as base for selection
Custom Order - uses a custom selection order (see below)
Previous/next custom order dialog
Open the selection order list by selecting Custom Order, or by selecting Set Custom Order from the
menu. The Custom Order allows precise control over the fixture selection order. When selecting
Custom order, the Only select same type as Master Fixture and any tab restriction will be disabled.
To add fixtures to the order of selection, enable the Auto-add Master Fixture button, and select the
fixtures to add to the list by clicking the fixture icons one by one. Alternatively, select the required
fixture as Master fixture, and right-click the list to insert or add the fixture to the list. Fixtures may be
removed from the list by highlighting the line(s) and selecting remove fixture or remove lines from
the right-click popup menu. Use the Clear All function in the preferences menu to clear all entries
into the list.
Selection breaks may be inserted or added to the list by selecting a line and right-clicking. Inserting
or adding a Selection Break creates a 'break' in the next/previous selections. In the example above,
the break after fixture number 8, means that when fixture 8 is selected as master, clicking next
fixture the selection will loop back to fixture number 5 since this is the first fixture in the block
contained by the two breaks. Likewise when fixture number 5 is selected, clicking previous fixture
will loop the selection to fixture number 9 as this is the last fixture in the block.
Fixture groups
Click the fixture groups icon on the fixture tool bar to access the fixture group dialog.