Specifications

53 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Clear fixture data dialog.
Clear Sequence Data Clears all data in all programmed sequences.
Clear Presets Clears all preset data.
Clear Macro Data Clears contents of generic DMX macros
Clear Misc Data Clears data that does not fit in the 2 previous categories (e.g. default DMX
values or contents of static entries)
Note that the clear data operation is irreversible - once cleared it is not possible to restore the cleared
data.
Also note that for user definable color crollers only the intensity information will be cleared, the color
information will not be affected.
See also copy from fixture
Applying default DMX to new fixtures
Normally LightJockey assumes a default value of 0 for all DMX control channels. However a some
fixtures may implement DMX protocols where 0 values may have unwanted side effects, such as
switching off discharge lamps, also some profiles includes defaults such as default pan/tilt in 'home'
position.
LightJockey will automatically apply default DMX values to new fixtures when saving the configuration,
unless disabled in the preferences menu of the fixture configuration dialog - when automatic apply is
disabled the following dialog will appear when saving a configuration that contains new fixtures.
Apply Default DMX prompt
Click Yes to the "Apply Default DMX values to new/modified fixtures" dialog when saving the new
configuration to automatically apply default DMX values to newly configured fixtures.
See also the user definable fixtures profiles, special tab, default DMX output
Customizing built-in fixture profiles
Profile types
LightJockey contains 2 different types of fixture profiles; user defined profiles and built-in profiles.
Built-in profiles are mainly used for Martin fixtures. The palettes and functions of user defined profiles
are defined through a special configuration dialog (see user definable fixtures profiles). The functions of
a built in profile can not be modified, for several profiles however it is possible to customize the
palettes (e.g. after replacing gobos in the fixture) as well as the default link to an Offline Visualizer
profile (see below).