Specifications

51 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
fixtures without a valid DMX address. Furthermore it is not really possible define fixture profiles unless
the configured fixture has a valid DMX address.
Fixture #XX has invalid DMX address - the DMX address given to the fixture is invalid. Usually it is
because there is not enough DMX addresses left to contain all the fixtures control channels.
DMX address L:AAA is used by more than one fixture - two or more fixtures are using the same DMX
control channel - while this may be intentional it usually an error. Note that overlapping addresses
may lead to errors in internal control channel patching.
configuration warnings
To save the configuration regardless of the warnings click Save Anyway
Copy from fixture
From the fixture configuration dialog it is possible to copy the entire programmed contents from
another fixture if the two fixtures are of an identical type (profile). The configuration must be saved
before a copy from fixture can be performed. To copy contents from one fixture to another, select the
target fixture (the fixture to copy to), right-click and select Copy From Fixture from the popup menu.
Copy from source fixtures list
A list of possible source fixtures will be displayed in a list. Select the source fixture and click Ok.
Copy filter