Specifications

38 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
size.
The color of the memory 'bar' indicates the amount of free physical memory left.
Green indicates more than 3 Megabytes physical memory free.
Yellow indicates between 2 and 3 Megabytes free physical memory free.
Orange indicates between 1 and 2 Megabytes free physical memory free.
Red indicates less than 1 Megabyte physical memory free.
As long as the indicator stays in green everything is fine. When the indicator goes through yellow and
orange, it indicates that there might be a slight loss of performance as there is little physical memory
left. A red indicator means very little or no physical memory free, probably causing a pretty poor
performance. it is still perfectly possible to run LightJockey even if the bar is red, as long as Windows
supplies enough virtual memory (and it usually does) - just expect for slower performance.
Fixture icon popup
To access this menu right-click on any of the fixture icons on the desktop.
Fixture icon popup
Select All programmed of this type - selects all fixtures of this type that are programmed in the
current scene. This function requires that the Show programmed fixtures option is enabled.
Select All of this Type - Deselect All of this Type - selects or de-selects all fixtures of the same type
as the 'clicked' fixture. The 'clicked' fixture automatically becomes master fixture when this function is
used.
Clear This Fixture - Clear Selected Fixtures - when clicked all fixture parameters are set to off in the
current scene in the current sequence.
Output generated by default DMX output, statics, the current cue or background cue is not affected.
Fixture Info - opens the fixture info panel
The info panel shows the fixtures DMX address and intensity group. If the profile contains DIPswitch
information the dipswitch shows the settings according to DMX address.
Fixture Notes - shows the fixture profile notes (same notes as shown in the fixture configuration)
DMX Output - opens the DMX output monitor aligned with the fixtures DMX address.
Fixture Configuration - opens the fixture configuration dialog with the fixture already selected.
Global Patch - opens the global patch dialog aligned on the fixtures DMX address.