Specifications

32 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Enable link to Capture - enables communication with the Capture Visualization application running on
the same or another networked PC - see interfacing with Capture for more information
Data Restore tab - see using the data restore option
Startup options
To access the startup dialog, select Setup/Preferences/Startup from the desktop main menu.
Startup options dialog
Auto Lamp-On - enabling this option will configure LightJockey to startup with a lamp-on cycle,
sending lamp-on commands to all fixtures that support a lamp-on command. Lamp-on commands are
sent to one fixture at a time with a delay of approx. 1 second to avoid a surge on the power line. Set
the duration of the power-on cycle to 1 to 5 minutes. If none of the configured fixtures support lamp-
on, the cycle will be aborted. The power-on cycle will run before any auto-start programs are
executed. During the lamp on cycle a window will appear on the desktop, displaying the lamp-on
cycle progress. The cycle may be aborted at any point by clicking Stop. The auto-lamp on command
is also available under the desktop main system menu. When started from here cycle will continue
until canceled.
Auto lamp-on cycle
Load On Startup (programs auto-start) - these options enables LightJockey to automatically launch a
specific sequence, cue, cue list or background cue (BG cue) on startup. Click the relevant Select
button to select the sequence, cue, cue list or background cue to auto-start. Sequences and cue lists
requires a check mark in the Run check box to execute after load, else they will remain static.
Run Minimized - check to automatically to minimize LightJockey after start up as soon as all
initializations are done. This setting is useful if LightJockey has to run silently in the background with