Specifications

274 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
will be checked before the download file is created and the results are shown in a list, displaying the
total number of warnings and errors at the bottom of the list.
Memory file list
The following issues generates warnings:
Fixture(s) using macros: 0ne or more fixtures have been programmed with a movement macro. The
macro is ignored.
Fixture(s) using fade/fadetime - changed to snap : one or more fixtures have been programmed with
fade times. Fade times are ignored.
Too few scenes in sequence - will patch with 0 : there are less than 6 scenes in the sequence, the
remaining scenes are patched with 0.
Too many scenes in sequence - scenes 1- 6 will be used : there are more than 6 scenes in the
sequence, only scene 1 through 6 are used.
The only situation that will generate errors is if a sequence has been assigned to a 2518 bank and
then deleted before the .mem file is generated.
If the sequence list contains no errors, the memory file may be saved to disk by clicking Save Mem
File. Please refer to the documentation on the upload/download utility and the 2518 controller (all
available from www.martin.com - support section) for information on how to download the Memory file
to the 2518 controller and how to use the 2518 controller for playback and programming.