Specifications

267 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Total number of scenes affecting total capacity
The memory space used various settings in the 2510 has a fixed size, so the number of sequences
downloaded does not affect the capacity of the 2510, only the total number of scenes in the
sequences.
Fixture addressing affecting total capacity
Since the 2510 needs scene data from DMX channel no 1 to the last DMX channel in used by the
selected fixtures, the scene capacity depends on the last DMX address used.
LightJockey continuously keeps track of the actual and maximum scene count (if the scene count is
not visible it is either because no fixtures have been selected or fixtures on different links have been
selected). The capacity ranges from a total of 42325 scenes if only DMX channel 1 is used to 247
scenes in total if all 512 DMX channels are used.
2510 Sequence List
2510 list columns
## - Indicates the number of the sequence entry (also the number the sequence will have once
downloaded into the 2510).
Seq# - Indicates the LightJockey sequence number.
SeqName - The LightJockey sequence name.
Scenes - The number of scenes in the sequence.
TrigType - The default trig type of the sequence once downloaded into the 2510 (see below)
Loop- The number of times a sequence should loop when the 2510 is running in list or sub-list mode
(see below)
SubList- The sub-list number assigned to the sequence (see below)
Time- The time it takes for the sequence to perform all its loops in list or sub-list mode (only
calculated for sequences in auto-trig mode)
The 2510 can hold a maximum of 99 sequences (98 if a special startup sequence is used).
To assign sequences to the 2510 download list, simply drag sequences from the list of sequences to
the 2510 list (note: sequence list must be in drag mode). Alternatively, right-click on the sequence in
the list of sequences and select add to 2510 list from the popup menu to add the sequence to the first
empty line in the 2510 list (requires that the 2510 download list window is opened). Once sequences
are placed in the 2510 download list, several attributes such as trig mode or loop count can be set for
each individual sequence.
To insert an entry before or delete a sequence entry right-click the line and select the action from the
popup menu.
2510 start-up modes
The download file assigns one of three different 2510 startup modes:
2510 start up mode
Manual - each sequence in the list loops continuously until a new sequence is selected.
List - each sequence loops the number of times indicated by the sequence loop value. After the last
loop the next sequence in the list is automatically started.
Sub-List - in Sub-list mode the 2510 works similar to the list mode, except it only runs sequences
belonging to a given sub-list (e.g. all sequences in sub-list 1). A sequence can only be assigned to
one sub-list. The actual sub-list may be selected on the 2510 after start up. The 2510 always start up
using the sub-list with the lowest number.
Sequence Attributes