Specifications

19 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Updating the driver for the USB DMX interface
When updating the driver for the USB DMX interface as prompted by an in-program notification or
release notes please follow the following procedure:
1. Shut down LightJockey.
2. Unplug all USB DMX interfaces.
3. To update the driver run the driver installation program located in the <LightJockey Installation
Path>\HardwareDrivers\ and follow any onscreen prompts. If updating from a downloaded driver
update, please follow the instructions given for the download.
4. Once the driver setup application has finished, attach each individual USB DMX interface one at a
time wait for 10 seconds and allow Windows Found New Hardware Wizard to complete for each
interface if required (the wizard may not appear in all circumstances).
5. Restart LightJockey and check that the interfaces are recognized by selecting Setup/Hardware
Setup from the main menu.
Please note that updating drivers will most likely require a user account with administrator access
(depending on Windows version)
Audio
Audio setup
Use the Audio tab to configure and select audio options for LightJockey.
Audio options
The Audio Analyzer
The Audio analyzer program enables LightJockey to use audio input via a sound card to trig
sequences in the cue. See using audio in and trigging sequences in the cue for more information.